Listed below are our range of locally built CNC's.

QT-42 & QT-52

QT-42 BAR FEED CNC LATHE

Efamatic QT-42 With Servo Bar Feeder

Strong, Reliable, Accurate & Fast for Cost Effective Manufacture
  • Fanuc Oi TC high speed CNC.
  • Fanuc AC Servo Motors.
  • 5.5/7.5 kW Main Spindle motor.
  • 42mm Collet chuck.
  • High accuracy and excellent production repeatability.
  • Excellent machine reliability.
  • Fast cycle times.
  • Excellent chip flow.
  • Ergonomically designed.
  • Minimum floor space required.
Download QT Brochure

 
MACHINE SPECIFICATIONS
Spindle Nose  (opt) A5  (A6)
Collet Chuck Size  (opt) 42 mm dia   (52mm)
X Axis travel  150mm  radius
Z Axis travel  250 mm
Maximum Spindle speed 6000 RPM
Rapid Traverse X Axis 25m/min
Rapid Traverse Z Axis 25m/min
Bar Capacity (opt) 42 mm  (52mm )
Turning toolholder size 16 mm square
Maximum Boring Bar diameter 20 mm
X Axis Motor AC 8 Nm continuous
Z Axis Motor AC 12 Nm continuous
Main Motor  Power AC 5.5/7.5 kW
X Axis Linear Guide 34 x 32 mm
Z Axis Linear Guide 34 x 32 mm
Ball screw X axis 32 dia x 5mm Pitch
Ball screw Z axis 32 dia x 10 mm Pitch
Machine Weight 2200 kgs

 

CONTROL SPECIFICATIONS
LCD Colour Monitor Multiple repetitive cycles
Toolpath Graphics Prog. Data input G10
Program memory 120 KB Background editing
Absolute Encoders Run hour & parts count 
Direct dwg dimension prog 1st Spindle orientation
Canned cycles 64 Tool offset pairs

 

STANDARD  EQUIPMENT
8 Toolposts High pressure coolant 
Linear Guides Machine Light
Toolkit Hydraulic Oil Cooler
Swarf Conveyor Heat Exchanger
Swarf Bin

 

OPTIONAL EQUIPMENT
Automatic door opener 100mm Power Chuck
Spindle Orientation Parts Catcher
Special Toolholders A6 spindle

 

RT-20

 

RT-20 SLANT BED CNC LATHE
Efamatic RT-20

Strong, Reliable, Accurate & Fast for Cost Effective Manufacture
  • Oi-TC high speed CNC.
  • AC Servo Motors.
  • 11/15 kW Spindle motor.
  • 200mm three jaw power chuck.
  • Rigid tailstock. 4 M.T.
  • High accuracy and excellent
    production repeatability.
  • Excellent machine reliability.
  • High Pressure coolant.
  • Fast cycle times.
  • Excellent chip flow.
  • Ergonomically designed.
  • Minimum floor space required.
Download RT-20 Brochure

 
MACHINE SPECIFICATIONS
Spindle Nose (opt)  A6 (A8)
Standard Chuck Size (opt)  Dia 200 mm (250mm)
X Axis travel  260mm dia
Z Axis travel  450 mm
Maximum Spindle speed  4500 RPM
Rapid Traverse X Axis  24 m/min
Rapid Traverse Z Axis  24 m/min
Bar Capacity (opt)  52 mm (75mm)
Turning toolholder size  20 mm square
Maximum Boring Bar dia  32 mm
X Axis Motor AC  8 Nm continuous
Z Axis Motor AC  12 Nm continuous
Main Motor Power AC  11/15 kW
Main spindle front bearing  90 mm inside dia
Main spindle rear bearing  85 mm inside dia
Ball screw X axis  32 dia x 10 mm Pitch
Ball screw Z axis  32 dia x 10 mm Pitch
Tailstock  MT4
Machine Weight  3800 kgs

 

CONTROL SPECIFICATIONS
LCD Colour Monitor  Multiple repetitive cycles
Toolpath Graphics  Prog. Data input G10
Program memory 120 KB  Background editing
Absolute Encoders  Run hour & parts count display
Direct dwg dimension prog  1st Spindle orientation
Canned cycles  64 Tool offset pairs

 

STANDARD EQUIPMENT
12 Toolposts  High pressure coolant
5 Reducing Bushes  Linear Guides
1 Set Hard Jaws Programmable quill
1 Set Soft Jaws  Toolkit
Hydraulic Oil Cooler  Heat Exchanger

 

OPTIONAL EQUIPMENT
Automatic door opener  Collet Chuck
Magnetic or scraper conv.  Parts Catcher
Special Toolholders  A8 Spindle

RT-25

 

RT-25 SLANT BED CNC LATHE
Efamatic RT-25

Strong, Reliable, Accurate & Fast for Cost Effective Manufacture
  • Fanuc Oi-TC ultra high speed CNC
  • Fanuc Alpha AC Servo Motors
  • Fanuc Alpha Main Spindle motor
  • 250mm three jaw power chuck
  • High accuracy and excellent
    production repeatability
  • Rigid tailstock
  • Excellent machine reliability
  • Fast cycle times
  • High Pressure coolant
  • Excellent chip flow
  • Ergonomically designed
  • Minimum floor space required
Download RT-25 Brochure

 
MACHINE SPECIFICATIONS
Spindle Nose (opt)  A8 (A10) (A12)
Standard Chuck Size (opt)  Dia 250 mm (300mm) (380mm)
Swing over Covers 440 mm diameter
X Axis travel  400mm (diameter)
Z Axis travel  600 mm
Maximum Spindle speed  3500 RPM
Rapid Traverse X Axis  15 m/min
Rapid Traverse Z Axis  20 m/min
Bar Capacity (opt)  70 mm (91mm) (118mm)
Spindle Bore 83 mm (120mm) (118mm)
Turret 12 Stations
Turret across flats 400mm
Turning toolholder size  25 mm square
Maximum Boring Bar dia  40 mm
X Axis Motor AC  8 Nm continuous
Z Axis Motor AC  12 Nm continuous
Main Motor Power AC  22/26 kW
Main spindle front bearing  120 mm inside dia
Main spindle rear bearing  110 mm inside dia
Ball screw X axis  40 dia x 5 mm Pitch
Ball screw Z axis  40 dia x 10 mm Pitch
Tailstock  5 Morse Taper
Machine Weight  5000 kgs

 

CONTROL SPECIFICATIONS
LCD Colour Monitor  Multiple repetitive cycles
Toolpath Graphics  Prog. Data input G10
Program memory 120 KB  Background editing
Absolute Encoders  Run hour & parts count display
Direct dwg dimension prog  1st Spindle orientation
Canned cycles  64 Tool offset pairs

 

STANDARD EQUIPMENT
12 Toolposts  High pressure coolant
6 Reducing Bushes  Linear Guides
1 Set Hard Jaws Programmable quill
1 Set Soft Jaws  Toolkit
Hydraulic Oil Cooler  Heat Exchanger

 

OPTIONAL EQUIPMENT
Automatic door opener  Collet Chuck
Magnetic or scraper conv.  Parts Catcher
Special Toolholders  500mm Manual Chuck

 

VT-30

VT-30 VERTICAL CNC LATHE
Efamatic VT-30

Strong, Reliable, Accurate & Fast for Cost Effective Manufacture
  • Fanuc Oi-TC ultra high speed CNC
  • Fanuc Alpha AC Servo Motors
  • Fanuc Alpha Main Spindle motor
  • 250mm three jaw power chuck
  • High accuracy and excellent
    production repeatability
  • Rigid tailstock
  • Excellent machine reliability
  • Fast cycle times
  • High Pressure coolant
  • Excellent chip flow
  • Ergonomically designed
  • Minimum floor space required
Efamatic VT-30
Download VT-30 Brochure

 
MACHINE SPECIFICATIONS
Spindle Nose A8
Standard Chuck Size(opt) Dia 315 mm (375)
Swing over Covers Dia 460 mm
X Axis travel (radius) 250 mm
Z Axis travel  550 mm
Maximum Spindle speed 2500 RPM
Rapid Traverse X Axis 15 m/min
Rapid Traverse Z Axis 15 m/min
Turret 12 Stations
Turret across flats 450 mm
Turning toolholder size 25 mm square
Maximum Boring Bar dia 50 mm
X Axis Motor AC 8 Nm continuous
Z Axis Motor AC 12 Nm continuous
Main Motor  Power AC 22 kW (P40)
Main spindle front bearing 140 mm inside dia
Main spindle rear bearing 120 mm inside dia
Ball screw X axis 40 dia x 5 mm Pitch
Ball screw Z axis 40 dia x 10 mm Pitch
Machine Volume 1.8 W x 20 D x 2.4 H
Machine Weight 5000 KG

 

CONTROL SPECIFICATIONS
LCD Colour Monitor Multiple repetitive cycles
Toolpath Graphics Prog. Data input G10
Program memory 120 KB Background editing
Absolute Encoders Run hour & parts count dis
Direct dwg dimension prog 1st Spindle orientation
Canned cycles 64 Tool offset pairs

 

STANDARD  EQUIPMENT
12 Toolholders High pressure coolant
6 Reducing Bushes Linear Guides
1 Set Hard Jaws Programmable Tailstock
1 Set Soft Jaws Toolkit

 

OPTIONAL EQUIPMENT
Automatic Door opener Magnetic or Scraper conv.
Special Toolholders  

VT-500

VT-500 VERTICAL CNC LATHE
Efamatic VT-500

Strong, Reliable, Accurate & Fast for Cost Effective Manufacture
  • Fanuc Oi-TC ultra high speed CNC
  • Fanuc Alpha AC Servo Motors
  • Fanuc Alpha Main Spindle motor
  • 250mm three jaw power chuck
  • High accuracy and excellent
    production repeatability
  • Rigid tailstock
  • Excellent machine reliability
  • Fast cycle times
  • High Pressure coolant
  • Excellent chip flow
  • Ergonomically designed
  • Minimum floor space required
Efamatic VT-30
Download VT-30 Brochure

 
MACHINE SPECIFICATIONS
Spindle Nose A8
Standard Chuck Size(opt) Dia 315 mm (375)
Swing over Covers Dia 460 mm
X Axis travel (radius) 250 mm
Z Axis travel  550 mm
Maximum Spindle speed 2500 RPM
Rapid Traverse X Axis 15 m/min
Rapid Traverse Z Axis 15 m/min
Turret 12 Stations
Turret across flats 450 mm
Turning toolholder size 25 mm square
Maximum Boring Bar dia 50 mm
X Axis Motor AC 8 Nm continuous
Z Axis Motor AC 12 Nm continuous
Main Motor  Power AC 22 kW (P40)
Main spindle front bearing 140 mm inside dia
Main spindle rear bearing 120 mm inside dia
Ball screw X axis 40 dia x 5 mm Pitch
Ball screw Z axis 40 dia x 10 mm Pitch
Machine Volume 1.8 W x 20 D x 2.4 H
Machine Weight 5000 KG

 

CONTROL SPECIFICATIONS
LCD Colour Monitor Multiple repetitive cycles
Toolpath Graphics Prog. Data input G10
Program memory 120 KB Background editing
Absolute Encoders Run hour & parts count dis
Direct dwg dimension prog 1st Spindle orientation
Canned cycles 64 Tool offset pairs

 

STANDARD  EQUIPMENT
12 Toolholders High pressure coolant
6 Reducing Bushes Linear Guides
1 Set Hard Jaws Programmable Tailstock
1 Set Soft Jaws Toolkit

 

OPTIONAL EQUIPMENT
Automatic Door opener Magnetic or Scraper conv.
Special Toolholders